Papenmeier-Compatible Mixer Blades
Mixer blades for Papenmeier-type heating and cooling mixers, made to the dimensions of your existing blade in AISI 304 stainless steel and balanced.

Highlights
Blades for Papenmeier-type mixers
Many of the turbo mixers used to make PVC dry blend come from other manufacturers. When their blades wear, you can keep your line running with Papenmeier-compatible mixer blades instead of waiting for parts. Besides blades for its own mixers, Erk PVC Makine makes blades for all mixer models, Papenmeier-type mixers included.
Blades are made to the dimensions of your existing blade and the geometry of your mixer vessel. In Papenmeier heating-cooling mixer combinations, for example, we can make blades both for the heating mixer's impeller and for the cooler's agitator paddles.
Heater blades and cooler paddles are different
When you ask for a quote, tell us which part you need. The heating mixer's blades turn at high speed and warm the material by friction; see also our turbo mixer impeller page for this part. The cooler's paddles turn slowly and carry the material to the cold vessel wall; details are on our cooling mixer paddles page. The two parts differ in shape, thickness and fixing. If you want to replace heater blades and cooler paddles at the same time, you can send the details of both in one request.
Why made to measure?
In a turbo mixer the blade runs at a set distance from the vessel floor and wall; its hub must sit exactly on the shaft and its fixing holes must match the existing pattern. A blade that does not hold these dimensions either risks touching the vessel or leaves material on the floor. That is why every order starts from the dimensions of your existing blade.
The geometry, on the other hand, is your choice. Rigid PVC recipes, such as profile and pipe, are often highly filled and need fast, controlled heating. In plasticised PVC recipes, even absorption of the plasticiser and avoiding lumps come first. You can ask for a copy of your existing blade, or review a different geometry for your recipe with us.
Options
Feature | Option |
|---|---|
Material | AISI 304 stainless steel |
Coating | Optional tungsten carbide coating |
Balance | Blades are supplied balanced |
Geometry | The customer's choice: same as the existing blade or chosen for the recipe |
Delivery | Usually from stock; otherwise 1–2 weeks |
What to send us to order
Any one of the following is enough to start:
What you can send | Details |
|---|---|
Drawing | A drawing of the blade or impeller set, if you have one |
Photos | The blade from above, from the side and from the hub side, with a tape measure next to it |
Measurements | The main dimensions (see the list below) |
If you take measurements, these values help; the letters match those in the product image:
- A – Outside diameter: tip to tip.
- B – Hub bore: shaft diameter and keyway, if any.
- C – Blade thickness and height: the thickest point of the wing and the wing height.
- D – Fixing holes: number of holes, their diameter and the distance between them.
Sending more than one of these speeds up the assessment further. If the blade is worn, measure an unworn area or tell us it is worn. Add your mixer's volume and recipe type, and we will base our geometry suggestion on them.
After delivery: fitting and first run
Before fitting the new blades, make sure the hub sits cleanly and fully on the shaft and that all fasteners are present. After fitting, turn the impeller by hand to check that it does not touch the vessel. On the first run, watch the mixer for vibration and noise and note the heating time of the first batches. That figure becomes your baseline for later wear checks. If you notice a problem, our service team can help remotely.
Why Erk PVC Makine?
Erk PVC Makine designs and builds turbo mixers for PVC mixing lines in its own factory in Ergene, Tekirdağ. We know from our own mixers how blade geometry affects heating time and blend quality. We apply that experience to blades for mixers from other manufacturers too, and offer new blades, refurbishment and coating from one place. Our service team can support the replacement remotely or on site.
Signs of wear
Wear depends on the filler (calcium carbonate) content of the recipe and on running hours. Longer heating times, a change in dry blend quality or bulk density, more vibration and rounded blade edges show it is time to check the blades. See mixer blade wear for details.
New blades or refurbishment?
Your blades do not always have to be replaced. Our mixer blade coating and refurbishment service also covers blades not made by Erk. Send us your existing blade and we will decide together whether renewal or a new blade suits you better.
Related pages
If you are planning a new line or more capacity, see our horizontal turbo PVC mixer series.
Trademark note: Papenmeier is a trademark of its respective owner. Erk PVC Makine is not affiliated with that company and is not its authorised dealer or service partner. The name is used only to indicate which type of mixer the blades fit.
Send us a drawing, photos or measurements of your blade, and we will quickly quote your Papenmeier-compatible mixer blades.
Downloads
Frequently Asked Questions
Can you make blades for my Papenmeier mixer?
Yes. We make blades for all mixer models, Papenmeier-type mixers included, to the dimensions of your existing blade. Erk PVC Makine is not affiliated with Papenmeier; the name is used only to indicate compatibility.
What information is enough to order?
A drawing, photos or the main dimensions of the blade. If you also tell us your mixer volume and recipe type, we will base our geometry suggestion on them.
What material are the blades made of?
AISI 304 stainless steel, supplied balanced. An optional tungsten carbide coating can be applied.
What is the delivery time?
Usually from stock. If the blades are not in stock, delivery takes 1–2 weeks.
Do you make an exact copy of the existing blade?
The dimensions are taken from your existing blade; the geometry is your choice. You can ask for the same geometry or review a different one for your rigid or soft PVC recipe with us.
Can I have my Papenmeier-type blades refurbished?
Yes. Our refurbishment and coating service covers all blades, including those not made by Erk.
Related Products
Get a Quote
Request a Quote
Fill in the form and our sales engineers will get back to you within one business day.














