Henschel-Compatible Mixer Blades
Blades and impellers for Henschel-type turbo mixers, made from a drawing, photos or measurements in AISI 304 stainless steel, balanced and in a geometry suited to your recipe.

Highlights
Blades and impellers for Henschel-type turbo mixers
Henschel-type high-speed mixers, for example heating mixers such as the FM series, are widely used to prepare PVC dry blend and similar powder blends. In these mixers too, the impeller is the part with the biggest influence on blend quality. Erk PVC Makine makes Henschel-compatible mixer blades and impeller sets to the dimensions of your existing part. Besides our own mixers, we make blades for all mixer models, Henschel-type mixers included. Depending on your needs, we can make the complete impeller set or only the worn blade.
Four steps from measurement to delivery
- Send us the information: a drawing, photos or measurements of the blade, any one of them is enough.
- Choose the geometry together: ask for a copy of your existing blade or review a different geometry for your recipe.
- Decide on options: we agree with you whether you want the optional tungsten carbide coating.
- Delivery: blades are supplied balanced; usually from stock, otherwise within 1–2 weeks.
Geometry for your recipe
The same mixer gives different results with different recipes. In rigid PVC recipes, such as profile, pipe and cable trunking, high filler content and fast, controlled heating come first. In plasticised PVC recipes, such as cable, hose and film, even absorption of the plasticiser and avoiding lumps matter most. If your product range has changed, or heating takes longer than you expect in your Henschel-type mixer, we can choose the geometry of the new blade accordingly. We explain the impeller's role in what is a turbo mixer.
If heating takes longer, check the blades first
If the same recipe takes longer than before to reach its target temperature in a Henschel-type mixer, the impeller is usually the first place to look. Worn blades move the material less effectively and less heat is created by friction. If the blades are in good shape, also review changes to the recipe, the batch size and the order in which additives go in. Changing the recipe before checking the blades can hide the real problem. We cover these topics in detail in hot mixer temperature profile and PVC dry blend problems.
Options
Feature | Option |
|---|---|
Material | AISI 304 stainless steel |
Coating | Optional tungsten carbide coating |
Balance | Blades are supplied balanced |
Scope | A single blade or a complete impeller set |
Delivery | Usually from stock; otherwise 1–2 weeks |
We assess at quotation stage whether the coating suits your recipe.
What to watch when measuring
If you have no drawing, we can start from measurements or photos. The letters in the product image match these dimensions:
Letter | Dimension | Tip |
|---|---|---|
A | Outside diameter | Tip to tip, measured on an unworn blade |
B | Hub bore | Shaft diameter; keyway width, if any |
C | Thickness and height | Thickest point of the wing and wing height |
D | Fixing holes | Number of holes, their diameter and spacing |
If you send photos, take the blade from above, from the side and from the hub side, with a tape measure next to it. If the impeller has more than one level, separate photos of each level make our work easier. If you measure a worn blade, say so in your request. Add your recipe type and mixer volume, and we will base our geometry suggestion on them.
A single blade or a complete set?
If only one blade of the impeller is damaged, a single blade can be made. But blades work together and usually wear together. A single new blade running alongside worn ones can change the impeller's balance and the material flow. We therefore recommend checking the other blades of the set for wear and balance, and renewing the set together if wear is clear. When you change the set, you can have the removed blades refurbished and keep them as a spare set instead of scrapping them.
Why work with us?
We design and build turbo mixers ourselves in our factory in Ergene, Tekirdağ. We know from these mixers how blade geometry affects heating time and the blend, and we apply that knowledge to blades for mixers from other manufacturers. Our service team can support the replacement remotely or on site.
When do you need new blades?
Wear depends on the filler (calcium carbonate) content of the recipe and the mixer's running hours. These signs mean the blades should be checked:
- The blend takes longer to reach its target temperature
- Dry blend quality or bulk density changes
- Vibration or noise from the mixer increases
Blades do not always have to be replaced. You can have your Henschel-type blades renewed through our mixer blade coating and refurbishment service, which also covers blades not made by Erk. For the causes of wear, see mixer blade wear.
Related pages
If you are considering a new mixer to replace your existing one, see our vertical turbo PVC mixer series.
Trademark note: Henschel is a trademark of its respective owner. Erk PVC Makine is not affiliated with that company and is not its authorised dealer or service partner. Brand and series names are used only to indicate which type of mixer the blades fit.
Send us a drawing, photos or measurements of the blade for your Henschel-type mixer, and we will quickly prepare a quote.
Downloads
Frequently Asked Questions
Can you make blades or an impeller for my Henschel mixer?
Yes. We make single blades or impeller sets for all mixer models, Henschel-type mixers included, to the dimensions of your existing part. Erk PVC Makine is not affiliated with Henschel; the name is used only to indicate compatibility.
I have no drawing. Can I still order?
Yes. Photos or the main dimensions of the blade are enough. We recommend photographing it from above, from the side and from the hub side, with a tape measure next to it.
What material are the blades made of?
AISI 304 stainless steel, supplied balanced. An optional tungsten carbide coating can be applied.
How quickly can you deliver?
Usually from stock. If the blades are not in stock, delivery takes 1–2 weeks.
Can you change the geometry?
Yes. The geometry is the customer's choice: the same as the existing blade, or a different geometry chosen with you for your rigid or soft PVC recipe.
Can I have my Henschel-type blades refurbished?
Yes. Our refurbishment and coating service covers all blades, including those not made by Erk.
Related Products
Get a Quote
Request a Quote
Fill in the form and our sales engineers will get back to you within one business day.














